Modified Office Container

  • Modified Office Container
right1

Modified Office Container are made up of mile steel material which provides you very good durability and low maintenance. These obile Container Cabins are provided with amenities like furniture as per clients requirement.

Features:
  • Easy to Install at Site
  • Light in Weight
  • Easily un-installed and Transported
  • Unaffected by Weather Conditions

TECHNICAL SPECIFICATION OF PORTA CABINS

BOTTOM FRAME

100mm X 50mm Specially formed M.S C-Channel 5mm Thick (Weight per 20ft length should be in range of 52 kgs)
Horizontal Cross Member :-
100mm X 50mm Specially Formed M.S I-Beam 5mm Thick(Weight per 20ft length should be in range of 42 to 44 kgs)
Vertical Cross Member :-
35mm X 75mm M.S Rectangular Pipe 3mm (Weight per 20ft length should be in range of 18 to 20 kgs)
Bottom Frame should be painted with Black Japan kind of material

STIFFENER TOP

20mm X 40mm Specially Formed M.S Square Pipe (Weight per 20ft length should be in range of 7 kgs)

SIDE POST COLUMN

65mm X 65mm Specially Formed M.S Square Pipe (Weight per 20ft length should be in range of 28 to 30 kgs)

PANELLING OUTSIDE

PUF Insulated Sandwich Panel made of .45mm TCT(Total Coated Thickness)color coated galvanised sheet for outer skins. The core in outer profile sheet shall be polyurethane foam(PUF) Total wall thickness would be 50mm

ROOF OUTSIDE

Roof shall be made of M.S Sheet Supported with pipe structure and interior should be finished with prelaminated board. There should be 50mm Glasswool thick in order to avoid heat

FALSE CEILING

[8 mm PRELAMINATED BOARD SHEET] SHADE- HIGHLAND PINE with Bidding Patti and L-Patti in Black Coated Alluminium

BOTTOM FLORING

18mm V-Board(Cement Bonded Fibre Board) and Installed with Taping Screw with Vinyl Carpet 1.2mm Thick

DOOR

One Door shall be fitted as per desired layout .Door shall be made out of PUF Insulated Panel with M.S frame work(size: 6'6"x3').Suitable Locking Arrangement shall be provided

WINDOWS

3’ X 3’ Window shall be aluminium double shutter sliding type, with black powder coating with safety grill, glass shall be clear or dark float glass

INSULATION

All void within the external wall & inner wall are filled with Glasswool with 25mm thick for Side Wall and 50mm thick for Roof, which posses rare combination like lower thermal conductivity & high resistance to moisture & heat for False Ceiling and Sidewall

OUTSIDE PAINTING

All components are painted internally as well as externally with two coats of Epoxy Primer where ever with two necessary and coatsof Epoxy Paints

WIRING

All wiring Shall be OPEN type with Casing Patti & shall be of PVC insulated copper wire

ELECTRIC FITTING

All electrical fitting in the Portable Cabin Shall be 220-240 V, AC 50 Hz, Modular switch and socket with Khaitan(Ceiling Cabin Fan) & Tubelights and Bulkhead(External) Light above door and 32amp MCB at the input junction for safety

EARTHING

Earthing Point Shall be Provided for Safety

LEGS

6 Inch Height Four Legs for four Corners

HOOKS

Specially formed Hooks For Easy Lifting and Shifting

Our Clients